A broad range of top quality Polyethylene and Polypropylene products with steady and reliable supply

Polyethylene

CAP produces high quality Polyethylene (PE) which is sold under the trademark brand “Asrene^®”. PE is made by polymerization of Ethylene gas before blending the powdered resin with various additives to improve the end-product’s performance. It undergoes stringent QA/QC monitoring and testing before being packed in 25-kg packaging for our customers.

"Asrene^®" product line-up consists of HDPE which has stiff property, LLDPE which has flexible property and Metallocene LLDPE which enhanced mechanical properties of LLDPE Films. It can be manufactured into a wide range of applications, which is including film, injection molding, blow molding, pipe and monofilament.

Linear Low Density Polyethylene (LLDPE)

Its density vary from 0.915 to 0.925 g/cm³. Due to its molecular weight, LLDPE exhibits excellent toughness, flexibility, and relatively good transparency. LLDPE is mainly used for general injection product and film.

Product	Grade	Melt Index (g/10min)	Density (g/cm3)	TDS	SDS	Application
Blown Film	UF1810H	1.0	0.924			Cast and blown, film multi-layer
	UF1810SH	1.0	0.924			Blown film, agriculture film, various bags
	UF1810	1.0	0.919			Cast and blown film, multi layer film, stretch film and powder coating
	UF1810T	1.0	0.921			Blown film, cover sheet, inner liner, garment sack, rice bag and transparent film
	UF1810S1	1.0	0.922			Blown film, garbage bag, inner liner, ice mambo bag, shopping bag and agriculture film
	UF1820	2.0	0.917			Stretch film, cast and blown film, multi-layer film
	UF1820T	2.0	0.922			Blown film, cover sheet, garment sack, inner liner, rice bag, transparent film
	UF1820S1	2.0	0.922			Blown film, garbage bag, inner liner, ice mambo bag, shopping bag and agriculture film
Injection	UI2650	50	0.927			Houseware, lid, bottle closure, masterbatch, powder coating, and toy
	UI2420	20	0.924			Houseware, lid, bottle closures, toys
Rotomolding	UR3840V	4.0	0.936			Water and chemical tank, cool boxes, and traffic cones
	UR3840VH	3.3	0.938			Rotational molding, water and chemical tank, cool boxes and traffic cones
	UR3750V	5.0	0.937			Rotational molding, water and chemical tank, containers, toys and playground equipment
	UR3650	5.0	0.936			Rotational molding, water and chemical tank, containers, toys and playground equipment
Wire and Cable	UC1827	2.7	0.920			Low voltage power insulation cable and cable jacketing
Tubular Quench Film	UF2660TQ	6.0	0.926			Tubular quenching film, shopping bags, grocery and seed bags, disposal bags, and industrial liners application

Melt Index Test is conducted at 190 ^oC/2.16Kg

Metallocene Linear Low Density Polyethylene (Metallocene LLDPE)

Its density is equal to 0.918 g/cm³.  LLDPE resin made by metallocene catalyst is suitable for blown film, cast film and specialty packaging film applications that require excellent impact, toughness and outstanding heat seal.

Product	Grade	Melt Index (g/10min)	Density (g/cm3)	TDS	SDS	Application
Blown Film	UF1810MH	1.0	0.918			Blown Film, Multilayer Packaging Film, lamination film, FFS and heavy-duty packaging
	UF1810MT	1.0	0.918			Blown Film, Multilayer Packaging Film, lamination film, FFS and heavy-duty packaging
	UF1820MH	2.0	0.918			Blown film, stretch film, multilayer packaging film, lamination film, FFS and heavy-duty packaging
	UF1820MT	2.0	0.918			Blown film, multilayer packaging film, lamination film, FFS and heavy-duty packaging
	UF1835MH	3.5	0.918			Blown film, Cast film, Cast stretch film, form fill and seal packaging

Melt Index Test is conducted at 190 ^oC/2.16Kg

High Density Polyethylene (HDPE)

Its density is equal or greater to 0.941g/cm³. Due to its degree of branching, HDPE exhibits excellent tensile strength. HDPE is mainly for film, blow molding, general injection, pipe and monofilament.

Produk	Grade	Melt Index (g/10min)	Density g/cm 3	TDS	LDK	Aplikasi
Blown Film	SF5007	0.05	0.950			Blown film, general packaging, industrial liner, shopping and groceries bag
	SF4504	11.0	0.948			Blown film, general packaging,industrial liners and various bags
	SF4607	15.0	0.944			Blown film, general packaging,industrial liners and various bags
	UF5205H	0.07	0.953			Blown Film, shopping bags, grocery and seed bags, disposal bags and Industrial liners
	UF5205	10.5	0.953			Blown film, shopping bags, grocery and seed bags, disposal bags, and industrial liners
	UF4805H	10.5	0.948			Blown film, shopping bags, grocery and seed bags, disposal bags, and industrial liners
Pipe	SP4808	0.06	0.949			PE-100 certified, pressurized pipe, water distribution pipe, subduct conduit, sanitary and industrial pipe
	UP4806H	9.0	0.949			Blow molding, drum and industrial parts, medium to large-sized containers, synthetic rattan, water tank, PE-80 pipes
Monofilament	SM5508	0.90	0.954			Monofilament (rope, net), flat yarn (stretched tape, tarpaulin) and multi-layer film
	SY5308	0.8	0.953			Monofilament and flat yarn application, as well as for co-extrusion and lamination film
Injection	SI6005	4.5	0.958			Injection molding and continuous compression molding (CCM)
	SI6006	5.5	0.958			Injection molding and continuous compression molding (CCM)
	SI6008	7.0	0.960			Injection molding and continuous compression molding (CCM)
	SI6008V	7.0	0.960			Injection molding and continuous compression molding (CCM)
	SI5220	20.0	0.955			Injection molding, lids and bottle closures, masterbatch and powder coating, toys, housewares and trash cans
	SI5230	30.0	0.955			Injection molding, lids and bottle closures, masterbatch and powder coating, toys, housewares and trash cans
Blow Molding	SB5740	32.0	0.957			Blow molding, small sized containers, general purpose container, and industrial container
	SB5009	9.0	0.952			Blow molding, drum and industrial parts, large-sized containers, synthetic rattan, water tank, non-pressure pipes
	SB5010	12.0	0.954			Blow molding, drum and industrial parts, large-sized containers, synthetic rattan, water tank, non-pressure pipes
	UB5206H	0.07	0.953			Large sized containers (up to 100L), drum and industrial parts, non-pressure pipes, synthetic rattan
	UB5502H	0.23	0.954			Small sized containers (up to 5L), household and industrial container, food packaging, pharmaceutical and personal care container
	UB4806H	10.0	0.948			Blow molding, drum and industrial parts, medium to large-sized containers, synthetic rattan, water tank

Melt Index Test is conducted at 190 ^oC/2.16Kg

Polypropylene

CAP produces high quality Polypropylene (PP) which is sold under the trademark brand “Trilene^®”. PP is made by polymerization of Propylene gas before blending the powdered resin with various additives to improve the end-product’s performance. It undergoes stringent QA/QC monitoring and testing before being packed in 25-kg packaging for our customers.  

“Trilene^®” product line-up consists of Homopolymer which has a rigid property, Random Copolymer which has more transparent property and Impact (Block) Copolymer which has high impact resistance property. It can be manufactured into wide range of applications, which is including housewares, food packaging, electronics and automotive parts.

Homopolymer

PP Homopolymer only consists of Propylene, has high stiffness and glossiness properties. Its applications vary from food packaging (rigid and flexible), housewares, woven bags, etc.

Product	Grade	Melt Flow Rate (g/10min)	Density (g/cm3)	TDS	SDS	Application
IPP Film	HF10TQ	10	0.903			General packaging for food, sugar and cracker
CPP Film	HF7.0CP	7.0	0.903			CPP dry lamination film
	HF8.0CM	8.0	0.903			CPP metallized film
BOPP Film	HF2.0BM	2.9	0.903			BOPP metallized and matte film
Thermoforming	HE2.0TF	2.4	0.903			Thermoformed cup, sheet and container
Yarn	HY3.8FY	3.8	0.903			Woven bag, rope, tarpaulin, geotextile, carpet backing, strapping band, and drinking straw
Injection	HI10HO	10	0.903			Houseware, closure and toy
	HI35HO	35	0.903			Thin-walled products, houseware, and multi-cavities injection molding
	HI50TN	50	0.903			Thin-Walled Injection Molding (TWIM), take-away container, yoghurt cups, pen barrel
Non-woven	HS35NW	35	0.903			Non-woven bag, spunbond, apparel cover, disposal clothe and napkin

Random Copolymer

PP Random Copolymer consists of Propylene and a specific portion of Ethylene comonomers. It has high clarity and flexibility, and mainly used for products such as clear containers, flip-top caps, extrusion coatings for plastic packaging and another type of packaging.

Product	Grade	Melt Flow Rate (g/10min)	Density (g/cm3)	TDS	SDS	Application
Injection	RI10HO	10	0.900			Medium clarity container, houseware, and general purpose injection molding application
	RI10HCO2	10	0.900			High clarity containers, cassette case, flip top and ISBM bottle
	RI20HC02	20	0.900			High clarity containers, houseware, medical applications and general purpose injection molding aplication
	RI20HO	20	0.900			For general-purpose injection molding applications, housewares, and containers requiring high flow and medium clarity.
	RI30HC02	30	0.900			For general-purpose injection molding applications, housewares, and containers requiring high transparency, faster cycle time, and lower optimum processing temperature.
	RI70TW	70	0.900			Designed for thin-wall packaging that requires high flow and clarity.
Extrusion Coating	RE20WL	22	0.895			Production of BOPP and woven cloth extrusion coating
	RE27W	27	0.900			For production of BOPP and woven cloth extrusion coating requiring good bonding strength, stiffness, process-ability and low neck-in.
Blow Molding	RB2.0HC	2	0.900			Cosmetic and detergent bottle, syrup bottle, etc.
CPP Film	RF7.5CP	7.5	0.900			Heat sealable skin layer with slip and antiblock
	RF8.0CM	8	0.900			Metallizing CPP skin layer

Terpolymer

Polypropylene (PP) terpolymer is a heteropolymer composed of propylene with ethylene and butene comonomers. The advantages of PP terpolymer include excellent transparency, elastic properties, and a low sealing temperature, making it highly suitable as a sealant layer for Cast PP (CPP) and Biaxially Oriented PP (BOPP) film applications..

Product	Grade	Melt Flow Rate (g/10min)	Density (g/cm3)	TDS	LDK	Aplikasi
CPP Film	RF7.0TCP	7	0.900			Lapisan heat seal pada film CPP

Impact Copolymer

PP Impact Copolymer consists of Propylene, and Ethylene as rubbery phase. The characteristics of this type are this material can withstand impact load and low brittleness temperature (until -30^oC), and can cover some applications such as plastic pails, pallets, electronics and automotive products.s

Produk	Grade	Melt Flow Rate (g/10min)	Density (g/cm3)	TDS	LDK	Aplikasi
Injection	BI5.0GA	4.5	0.900			Peralatan rumah tangga, ember cat, part sepeda motor, mainan, peralatan elektronik, dan aplikasi injection molding secara umum
	BI5.0GN	5	0.900			Peralatan rumah tangga, perabotan rumah tangga, ember cat, part sepeda motor,  peralatan elektronik, dan aplikasi injection molding secara umum
	BI9.0GA	9	0.900			Peralatan rumah tangga, ember cat, mainan, container, part otomotif dan peralatan elektronik
	BI32AN	38	0.900			Thin-walled containers, mesin cuci, dan part otomotif
	BI55GN	50	0.900			Peralatan rumah tangga, part otomotif, kemasan thin-wall, peralatan elektronik dan compounding
	BI9.0BC	9	0.900			Cocok untuk kotak baterai, suku cadang otomotif dan elektronik, dll. yang membutuhkan kekakuan tinggi, aliran sedang, penyegelan yang baik, dan stabil terhadap UV.
	BI70GN	70	0.900			Digunakan untuk suku cadang otomotif, peralatan rumah tangga, kemasan dinding tipis berdampak tinggi, gelas yoghurt, serta suku cadang elektronik
Extrusion Coating	BE1.5CS	1.5	0.900			Lembar bergelombang, alas kursi, peti, dll.